The dwelling was built using the Light Steel Frame (LSF) system, characterized by rapid construction and high structural efficiency. The application of a 0.5 mm layer of B-THERMIQ® Outside ensured a reinforcement of the thermal insulation without increasing the thickness of the building envelope. The bidirectional reflective solution significantly reduced heat exchange, improving interior comfort and preventing moisture formation, all while preserving the facade’s original aesthetic.

A wooden house requiring thermal reinforcement and protection against climatic variations. The 0.5 mm B-THERMIQ® Wood solution was applied, ensuring high reflectivity and emissivity. This system significantly reduced heat transmission, preventing condensation phenomena and increasing the durability of the wooden structure, all without compromising its natural aesthetic.

Intervention on a first-floor terrace situated directly over habitable areas, with a need for thermal reinforcement. The B-THERMIQ® Floor solution (1 mm thick) was applied before the tile installation, creating a bidirectional reflective barrier that reduced heat accumulation in the summer and energy losses in the winter. This application improved comfort in the spaces below and increased the durability of the final ceramic flooring.

9,000 m2 facade rehabilitation, composed of masonry walls and hollow brick. The material heterogeneity compromised the thermal performance and aggravated problems with interior comfort. The 0.5 mm B-THERMIQ® Outside solution was applied, ensuring high solar reflectivity and thermal emissivity. The system standardized the envelope’s performance, reducing heat gains in the summer and energy losses in the winter, all while maintaining the facade’s original aesthetic and respecting the project deadlines.

A semi-detached house with facades finished in coarse sand plaster, lacking adequate thermal insulation and subject to significant temperature variations. The 0.5 mm B-THERMIQ® Outside solution was applied directly over the existing finish, with no need to remove or alter the texture. The reflective and emissive layer ensured the thermal reinforcement of the building envelope, improving interior comfort and reducing energy consumption while preserving the original appearance of the sand plaster finish.

A housing complex built with exposed concrete, lacking thermal insulation, and exposed to intense solar radiation and climatic variations. The intervention aimed to improve thermal performance without altering the architectural appearance of the facade. The 0.5 mm B-THERMIQ® Outside solution was applied, creating a virtually invisible bidirectional reflective barrier that reduced heat absorption in the summer and energy losses in the winter, all while maintaining the original aesthetic of the concrete.

The two-family building showed visible moisture on the exterior walls, associated with poor thermal insulation and surface condensation. To solve this, the 0.5 mm B-THERMIQ® Outside solution was applied. In addition to increasing the envelope’s reflectivity and emissivity, it reduced the risk of condensation, stabilized the thermal performance, and protected the existing plaster. The rapid application allowed the facade to be rehabilitated without altering the building’s aesthetics.

Mixed masonry and stone construction. Project duration: 10 days. 0.5 mm B-THERMIQ® Outside. Complete renovation of the house to address its original thermal deficiencies, with the client’s priority being to preserve the façade.

Bedroom and bathroom Work duration: 3 days B-THERMIQ® Inside 0.5 mm on walls and ceilings. Apartment without thermal insulation. The client wanted a solution for the north-facing bedroom and bathroom. A specific color requested by the decorator was used.

Located in a protected area and classified as a UNESCO World Heritage site. Historic construction with 60 cm-thick walls. Project duration: 32 days in 4 phases (gables) 0.5 mm B-THERMIQ® Outside across the entire exterior of the house, including cornices. 0.5 mm B-THERMIQ® Inside in the underground areas with no exterior access. The client’s main priority was to reduce energy costs while preserving the original appearance.

Garage for 2 cars. Duration of work: 1 day B-THERMIQ® Interior with 0.5 mm. Garage with humidity problems, walls always wet and humidity above 90%. Piping with permanent condensation.

Asphalt tile roof.
Duration of work: 3 days
B-THERMIQ® 0.5 mm roofing.
This apartment had an air conditioning problem because the roof had no thermal insulation.
After applying a specific B-THERMIQ® primer, we used B-THERMIQ® Roofing, which succeeded in reducing the surface temperature by 20º on the first application.

Single-story masonry house. Project duration: 8 days 0.5 mm B-THERMIQ® Outside. Ground-floor house located in a high-humidity area, with very pronounced daily temperature swings.

Masonry construction
Work duration: 16 days
B-THERMIQ® Exterior 0.5 mm applied to the entire exterior of the house (in 3 colors).
B-THERMIQ® Interior 0.5 mm applied in underground areas without exterior access.
B-THERMIQ® Floor to insulate the floor (1 mm between slabs).
B-THERMIQ® Roof 0.5 mm to insulate the slab.
The thermal priority of this complete renovation was to find an effective solution to the region’s temperature variations and the corresponding energy costs.

Masonry construction with stone cladding.
Project duration: 13 days
Thermal insulation with 0.5 mm B-THERMIQ® Outside, in the chosen colour.
House with several thermal deficiencies; the client’s priority was to preserve the façade and insulate the stone-clad jambs and thresholds.